Wired Intelligent Edge (Campus Switching and Routing)

Reply
MVP Expert

ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hi, ArubaOS-CX 10.01.0030 introduced - enabled by default - the split-recovery feature for VSX (it's a parameter on vsx context).

 

Is there a way to understand if that feature is enabled or not (apart from presuming it is enabled - because that is default after any update to ArubaOS-CX 10.01.0030 - because node running configuration is not showing it with a prepend "no" assertion)?

Highlighted

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hi,

 

That table should summarize and clarify (hopefully).

Please let me know.

MVP Expert

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hi Vincent, thanks...I already followed the discussion about that on the other thread...my question is more related to understand if doing a show vsx status the split-recovery option is clearly reported as enabled (withouth be forced to look for it into the running-config) or not...or if does it exist a dedicated show split-recovery command.

Davide.

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

 show vsx configuration split-recovery

 

Split recovery info does not appear in show vsx status.

MVP Expert

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hi Giles,

 

the command you suggested above doesn't really exist on ArubaOS-CX 10.01.0030 (does came from a development version of ArubaOS-CX?):

 

Aruba-8320-1# show vsx status
VSX Operational State
---------------------
  ISL channel             : In-Sync
  ISL mgmt channel        : operational
  Config Sync Status      : in-sync
  NAE                     : peer_reachable
  HTTPS Server            : peer_reachable

Attribute           Local               Peer
------------        --------            --------
ISL link            lag128              lag128
ISL version         2                   2
System MAC          d0:67:26:XX:XX:XX   d0:67:26:YY:YY:YY
Platform            8320                8320
Software Version    TL.10.01.0030       TL.10.01.0030
Device Role         primary             secondary

Aruba-8320-1# show vsx configuration split-recovery
Invalid input: split-recovery

Aruba-8320-1# show vsx configuration ?
 inter-switch-link  Show current configuration of ISL
 keepalive          Show current configuration of keepalive

Am I missing anything?

 

Davide.

Contributor I

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hey Parnassus,

 

I don't see it either, if you type "list" you'll see a list of all available commands on the level you are currently on. If you do that on the base level, there is no "show xxx split-recovery" command, so I do believe it's not available just yet.

 

Something that I'm missing as well is a "show active-gateway" of any sort, per interface or in general, there is not such command either.

 

Cheers!

 

Aarón

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hi Davide,

 

Correct it comes from CLI test on one version ahead (next 10.01..).

MVP Expert

Re: ArubaOS-CX 10.01 VSX: how to show split recovery feature status?

Hi Giles,

 

I don't know if any software release of ArubaOS-CX 10.01 software branch post ArubaOS-CX 10.01.0030 finally introduced the command to verify the split-recovery status (enabled/disabled)...but, for sure, the command is available on latest ArubaOS-CX 10.02.0010:

 

Aruba-8320-1# show vsx configuration split-recovery
Split Recovery Mode : Enabled

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: