Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Contributor II

Re: ArubaOS-CX on ESXI

Your mistake is installing eve-ng on VirtualBox.

That won't run.

Install it on VMware Workstation.

Follow my link above on how to install eve-ng.

If still won't run email me on nbctcp@gmail.com

Highlighted
Frequent Contributor I

Re: ArubaOS-CX on ESXI

I have made some progress, I have the OS running in Eve-ng 

 

I am interested to know about your network set-up, I have previously configured the mgmt for DHCP and connected to the interface which has allowed access from the PC by SSH.

 

In Eve-ng while I have an mgmt network connected, I can't figure which interface to attached the CX to, nor can i get a DHCP address. 

 

How do you have EVE-NG configured?

Highlighted
MVP Guru

Re: ArubaOS-CX on ESXI

Mgmt interface is e0.

Like here:

image.png

Highlighted
Frequent Contributor I

Re: ArubaOS-CX on ESXI

I have given up with EVE-NG, spent 2 days trying in a number of formats, 

 

Bare metal, EXI, VMplayer.

I can't get andy Cisco, nor connectivity to another VM nor get networking to a CX. That's across 3 different platforms, having read the cookbok and wait far too long for builds.

 

Going back to GNS3

Highlighted
MVP Guru

Re: ArubaOS-CX on ESXI

Contact me: vincent.giles@hpe.com, I'll help you. 

I built the CX appliance for EVE-NG a while back, and can share how-to.

Highlighted
Frequent Contributor II

Re: ArubaOS-CX on ESXI

I have ArubaOS-CX on ESXi with GNS3-VM, but the Virtual Switches do not see each other. I don't see any mac in adress table or can ping another switch.

 

How to get 2 switches connected on GNS3-VM in ESXi?

 

 

Highlighted
MVP Guru Elite

Re: ArubaOS-CX on ESXI


@jAyR wrote:

I have ArubaOS-CX on ESXi with GNS3-VM, but the Virtual Switches do not see each other. I don't see any mac in adress table or can ping another switch.

 

How to get 2 switches connected on GNS3-VM in ESXi?

 

 


What your vSwitch configuration ?



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Frequent Contributor II

Re: ArubaOS-CX on ESXI

I have a vswitch without assigned NIC:

 

VLAN-ID  = none (0)

Promiscous-Mode = accept

MAC-Changes       = accept

Forged Transmits   = accept

 

In that Network is the GNS3-VM and a Gateway-VM 

 

Nic of the AOS-CX are type virtio-net-pci

Highlighted
MVP Guru

Re: ArubaOS-CX on ESXI

Are you a partner ? (i.e do you have access to Arubapedia for partner - AFP ?)

Highlighted
Frequent Contributor II

Re: ArubaOS-CX on ESXI

Yes i am Partner and Using gns3a template from afp

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: