Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor I

Backing up 2930m switch configs

New to the Aruba switches and still in the process of figuring out things. I'm trying to figure out how to backup the configs of the switches either by command line or gui so I can have a copy if a switch ever needed to be replaced, etc... We have 5 stacks in different locations. Thank you for your help, Matt
Occasional Contributor I

Re: Backing up 2930m switch configs

what switch firmware are you running at?

 

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/10226/Default.aspx 

Backup the Flash File System in the CLI
(host) #backup flash
(host) #copy flash: flashbackup.tar.gz tftp: <tftphost> <destfilename>
(host) #copy flash: flashbackup.tar.gz ftp: <ftphost> <username> <destfilename>
(host) #copy flash: flashbackup.tar.gz scp: <scphost> <username> <destfilename>
(host) #copy flash: flashbackup.tar.gz usb: <destfilename>
Restore the Flash File System in the WebUI
1. Navigate to the Maintenance > Copy Files page.
2. For Source Selection, specify the server to which the flashbackup.tar.gz file was previously copied.
3. For Destination Selection, select Flash File System.
4. Click Apply.

Highlighted
MVP Expert

Re: Backing up 2930m switch configs

it is for MAS switch

 

for Aruba OS Switch, you can use

copy run tftp://X.X.X.X/myconfig.cfg



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
Occasional Contributor I

Re: Backing up 2930m switch configs

Version 16.09.0001

Occasional Contributor I

Re: Backing up 2930m switch configs

On ArubaOS-Switch (formerly Provision switches)

From the CLI; capture a show run to a text file and save it.

From the Web GUI. Select Configurations> Management. In the right side, in the Download box, Click Download and save the file locally. It will default to config.pcc. PCC files can be opened with notepad or similar.

 

Occasional Contributor I

Re: Backing up 2930m switch configs

BTW, if you are using the Traditional web GUI instead of the Improved GUI, expand System and click on Updates/Downloads. Highlight the config file in the left side, then click on Download in the Configuration file section to store the config.pcc file locally.

Occasional Contributor I

Re: Backing up 2930m switch configs

I saw the Configurations> Management option to download, but wasn't sure if that was it.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: