Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor I

Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch

Is it possible to import a *.txt config file from Cisco Catalyst 3560G series PoE-48 and import it to Aruba 2530 48G PoE+ Switch?

MVP Expert

Re: Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch

No...

 

need to be convert (and there is no tools for this !)




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
MVP Expert

Re: Catalyst 3560G series PoE-48 config *.txt import to Aruba 2530 48G PoE+ Switch

As pointed out by @alagoutte you can't simply export a Cisco IOS NOS based Switch's configuration and import (copy) it - as-is - into an ArubaOS-Switch NOS based Switch...Cisco and Aruba (HP/HPE/Aruba) don't use the same NOS Network Operating System (it's a matter of Cisco IOS versus ProVision/ArubaOS-Switch).

 

You need to examine your actual configuration and try to replicate it by adapting (for what is possible) its commands to cope with ArubaOS-Switch equivalent ones.

 

There is a nice guide that help doing so. Check it here or here (and also one a little bit older here).

 

A brief (but interesting) presentation about how Cisco and HP/HPE/Aruba approach VLAN tagging and Port Aggregtion their own way is here.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: