Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Contributor I

Configuration Commands Guide & Fimware Image Details for Aruba 2930F Switches

Dear Team,

 

could you please share Configuration Commands Guide & Supported /Available firmware details for below mentioned Aruba Switch.

 

Switch Part Numbers: JL254A, JL260A

Model: Aruba 2930F

Installed Software Version:

 

Image stamp:
/ws/swbuildm/rel_xanadu_zeus_qaoff/code/build/lvm(swbuildm_rel_xanadu_zeus_qaof
f_rel_xanadu_zeus)
Jul 12 2019 07:57:56
WC.16.07.0006
245
Boot Image: Primary

Boot ROM Version: WC.16.01.0006
Active Boot ROM: Primary 

Note: Default Image come with this switch is WC.16.05.0007 (we have upgraded to WC.16.07.0006.

 

Thanks

 

 

 

 

 

 

 

MVP Expert

Re: Configuration Commands Guide & Fimware Image Details for Aruba 2930F Switches

Hi Shayan

 

Go to https://asp.arubanetworks.com for get last firmware and documentation




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
New Contributor

Re: Configuration Commands Guide & Fimware Image Details for Aruba 2930F Switches

Hi alagoutte,

 

Could you please share URL to get the configuration command guide (installed Software Image on the switch: WC_16_08_0006), we didn't find any documentation for this series (WC_169_x) software image all are related with Aruba-OS.

 

We need to familiar with configuration commands for below mentioned:

  • VLAN, Interface Tagging.
  • Port Trunking (Bundling) /Etherchanneling /LACP.
  • Routing
  • Access-Lists
  • User Management
  • DHCP Server Configuration.
  • DHCP Relay
  • Spanning Tree (STP)
  • VSF

More need to understand.

 

 

 

MVP Expert

Re: Configuration Commands Guide & Fimware Image Details for Aruba 2930F Switches

Greetings AASAMEDT and welcome to Aruba Airheads Community!

 

If I were you - with true desire to understand - I would first start by familiarizing with Aruba 2930F Documentation Map (direct link to PDF)...as you will see that map covers almost all you need into separated specific categories:

 

  1. Setting up
  2. Installing
  3. Planning and Implementing PoE/PoE+
  4. Operating
  5. Securing access
  6. Managing and Configuring
  7. Routing Multicast Traffic
  8. Managing Traffic
  9. Using IPv6 protocols

Then...if something is unclear or not well explained...for other deep dive guides/presentation/threads you could easily use the always valid tools like: Search Airheads (watch top right in this page, play with filter), ASP at asp.arubanetworks.com, HPE Community at community.hpe.com (Networking Forum) and support.hpe.com too. Plenty of choices...

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: