Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Aruba Employee

Configuring DHCP Server and DHCP Relay in ArubaOS-Switch

Hello All,

 

Attached guide provides in-depth understanding about DHCP Server and DHCP Relay Implementation in ArubaOS-Switch with configuration examples.

 

For more information about DHCP Relay, please, visit the following link: http://h22208.www2.hpe.com/eginfolib/networking/docs/switches/RA/15-18/5998-8165_ra_2620_mrg/content/ch03s09.html

 

Thank You,

Priyank Patel
New Contributor

Re: Configuring DHCP Server and DHCP Relay in ArubaOS-Switch

Hi Priyank,

thank you for the complete information.

One thing is missing for me : "How is the source address choosen?"

The szenario is that you have multiple IP adresses in one VLAN of the routing switch and want to move from a local DHCP server to a central one with DHCP Relay. And for only one address range you provide the addresses via DHCP.

Is there a command to see the "primary" address of the VLAN and one to set one address as the primary address?

I know at least two szenarios where I came across this issue.

Regards,

Hendrik

 

 

 

 

 

New Contributor

Re: Configuring DHCP Server and DHCP Relay in ArubaOS-Switch

I have DHCP configured on a linux server and the core switch which has layer 3 interfaces have the the ip helper-addresses configured pointing to the Linux DHCP server..do i still need "dhcp-relay" command on the switch for DHCP to work?

 

Please clarify

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: