Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
New Contributor

Do two stacked 2930M pass VLANS without connecting them from the front side?

Hi Guys,

 

I have 2 x 2930M switches which should be redundant; the 4 SFP ports of each switch are fully used for uplinks to edge switches

In case we used a stacking module, should I have to connect both switches with the copper prorts and do trunking again for the VLANS to pass between the 2 switches or is there any protocol that will enable this without reconnecting the switches?

Highlighted
MVP Expert

Re: Do two stacked 2930M pass VLANS without connecting them from the front side?

Greetings!

 

All VLANs configured on a switch stack are passed via the stacking ports to all members of the stack — no front panel connections or extra configuration are required. 



Matt Fern
Senior Technical Marketing Engineer, Aruba Switching

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: