Wired Intelligent Edge

Hello,

I know I may not be quite right here because it's about HPE 5130 switches.

But maybe someone can help me with an idea :)

We have 5130 switches in the IRF stack.
They run so far without problems.

But:

After booting up the PC, no Internet connection is displayed (yellow exclamation mark) for approx. 30 seconds.
If the user logs in too fast, it can happen that a drive does not connect.
Is there a setting in the switches?

The clients are all on Windows 10.

Problem persists, even without dhcp configuration.

Can you share the port configuration?

Is STP edge port enabled for the ports?

Hello,

thanks for the reply.

It is a flat config only vlan 1 (dont kill me for this, it is not final :) )

#
version 7.1.070, Release 3208P15
#
sysname Switch53
#
clock timezone Amsterdam add 01:00:00
clock summer-time FDT 02:00:00 March last Sunday 03:00:00 October last Sunday 01:00:00
clock protocol ntp
#
irf mac-address persistent timer
irf auto-update enable
undo irf link-delay
irf member 1 priority 10
irf member 2 priority 1
#
lldp global enable
#
password-recovery enable
#
vlan 1
#
irf-port 1/2
port group interface Ten-GigabitEthernet1/0/28
#
irf-port 2/1
port group interface Ten-GigabitEthernet2/0/28
#
stp global enable
#
interface NULL0
#
interface Vlan-interface1
ip address 172.16.1.53 255.255.0.0
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk permit vlan1
#
interface GigabitEthernet1/0/2
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/3
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/4
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/5
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/6
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/7
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/8
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/9
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/10
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/11
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/12
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/13
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/14
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/15
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/16
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/17
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/18
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/19
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/20
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/21
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/22
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/23
port link-type access
port access permit vlan 1
#
interface GigabitEthernet1/0/24
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/1
port link-type trunk
port trunk permit vlan1
#
interface GigabitEthernet2/0/2
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/3
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/4
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/5
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/6
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/7
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/8
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/9
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/10
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/11
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/12
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/13
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/14
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/15
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/16
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/17
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/18
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/19
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/20
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/21
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/22
#
interface GigabitEthernet2/0/23
port link-type access
port access permit vlan 1
#
interface GigabitEthernet2/0/24
port link-type access
port access permit vlan 1
#
interface Ten-GigabitEthernet1/0/25
port link-type access
port access permit vlan 1
#
interface Ten-GigabitEthernet1/0/26
#
interface Ten-GigabitEthernet1/0/27
#
interface Ten-GigabitEthernet2/0/25
port link-type access
port access permit vlan 1
#
interface Ten-GigabitEthernet2/0/26
#
interface Ten-GigabitEthernet2/0/27
#
interface Ten-GigabitEthernet1/0/28
#
interface Ten-GigabitEthernet2/0/28

#

sntp enable
sntp unicast-server 172.16.0.16
#

Hello, I set the setting accordingly.

The first tests were positive, but Windows still shows the yellow exclamation mark on the network connection.

But I will observe that.

Are there any other settings ?

for example regarding learning mac addresses ?

Can this also be related ?

I just ask :)

Thanks a lot first of all.

This can be different issues.

first check if the MAC address at the switch is learned fast enough.

This can also be some DHCP issues.