Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

HPE OfficeConnect 1920s and FreeRADIUS

Hi everyone,

I'm trying to get the switch work together with the freeradius.

The radius itself works fine with a cisco switch and does it job so i guess I'm missing something in the 1920s config.

The switch runs with software version PD.02.10.

 

Under Security ---> RADIUS

I enabled both 802.1x Auth and Acc Mode and added the IP and Secret for the radius (for both the Auth- and Acc-Server) and as NAS-IP Address i also entered the RADIUS IP.

 

Under Security ---> Port Access Control

I enabled EAPOL Flood Mode. I didn't changed the interfaces.

 

Under Security ---> Port Security ---> Global

The Admin Mode is still disabled and I didn't configured any interfaces either.

 

I think I have to enable the Admin Mode for Port Access Control to get it working? If so can I do it without denying the access for the devices which are connected to specific ports?

 

Regards,

Michael

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: