How to configure Storm Control?

Aruba Employee
Aruba Employee

Storm control prevents interfaces from disruptions by providing protection against excessive ingress rates of unknown-unicast, multicast, and broadcast traffic. The function can be set under switch-profile.


See an example below .
The settings are to allow only 50% of interface speed to be used for unknown unicast, broadcast and multicast traffic.


(host) (config) #interface-profile switching-profile STORM_CONTROL

(host) (switching profile "STORM_CONTROL") #storm-control-bandwidth 50

(host) (switching profile "STORM_CONTROL") #storm-control-unknown-unicast

(host) (switching profile "STORM_CONTROL") #storm-control-multicast

(host) (switching profile "STORM_CONTROL") #storm-control-broadcast

(host) (config) #interface gigabitethernet 0/0/20

(host) (gigabitethernet "0/0/20") #switching-profile STORM_CONTROL

Version history
Revision #:
1 of 1
Last update:
‎07-16-2014 07:46 AM
Updated by:
Labels (1)
Search Airheads
Showing results for 
Search instead for 
Did you mean: