How to display detailed interface transceiver information on Aruba Mobility Switch
Introduction : A Small Form-factor Pluggable (SFP) module is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. Diagnostic information related to signal strength, temperature, etc can be polled from SFPs installed in the Mobility Access Switch.
Feature Notes :
- SFP diagnostic is not supported on copper transceivers. Only fiber transceivers are supported.
- SFP diagnostic is supported on 1 Gbit/s and 10 Gbit/s fiber transceivers.
- Aruba supports most 1 Gbit/s and 10 Gbit/s transceivers.
Configuration Steps :
To display detailed stacking interface transceiver diagnostic information, issue the following command:
(host) #show stacking interface stack 0/1 transceiver detail
To display basic transceiver information, issue the following command:
(host) #show interface transceiver brief