Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

How to rout between vlans in Aruba 2530-48G by web interface ?

Hi all,

I have 3 switchs Aruba 2530-48G and one router Dektec300B. I already tested creating some vlans and it is done. Now i want a vlan (belong to  a vlan)  to be able to access to another. How can i do that in webinterface (i am newbie so cannot use cli)?

Thanks alot.

MVP Expert

Re: How to rout between vlans in Aruba 2530-48G by web interface ?

Greetings!

 

The 2530 is a Layer 2-only switch, and as such does not support inter-VLAN routing. You would need to tag the VLANs across the uplink to the router and configure it to perform any desired routing there.



Matt Fern
Technical Marketing Engineer, Wired Intelligent Edge

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: