Wired Intelligent Edge (Campus Switching and Routing)

Contributor II

Interface uptime

Hi, does any one know if there is a command to see since when an interface is in the current status?


For example, if I want to know since when interface 1 is up (or down).



Contributor II

Re: Interface uptime



I can't find a CLI command for that but you can see through SNMP the uptime of the switch when the port changed state for the last time.


The OID is . - ifLastChange:


The value of sysUpTime at the time the interface entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network management subsystem, then this object contains a
zero value.


Hope this helps.



Best regards,



Contributor II

Re: Interface uptime

Thank you for your reply.


I also didn't find a way to obtain this information other than checking the switch's log or an external server that collects SNMP traps.


I thought getting such basic information would be more straightforward and simple.

MVP Guru Elite

Re: Interface uptime

for ArubaOS or ArubaCX ?

PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master

ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Contributor II

Re: Interface uptime

ArubaOS, I have a 2530 and a 2930F in my lab at the moment.

Search Airheads
Showing results for 
Search instead for 
Did you mean: