Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

Is there a way to import a Cisco configuration into an Aruba s2500 switch?

Our district just got Aruba s2500's in and we were wondering, if there was a way we can easily use the configuration from our Cisco 3750 switches for the Aruba switches. We're planning on using a trunk port to go from the Cisco Switch to the Aruba switch as well.

 

Thanks!

Guru Elite

Re: Is there a way to import a Cisco configuration into an Aruba s2500 switch?

The Aruba MAS configuration is profile based so you cannot import the configuration directly.

 

Some of the commands are similar though, for example:

 

interface vlan 10

ip address 10.1.1.1 255.255.255.0

no shut

 

show ip interface brief

show vlan

 

 


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: