Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

J9773A 2530 SWITCH Can't Allow third-party transceivers

When I got a new J9773A Switch, it in version YA.16.3 and I try to enable third-party transceivers with command : " 

allow-unsupported-transceiver

but It not have this command, so I try to upgrade version to YA.16.10.000 newest this time and try again but I cann't allow too.

My transceiver is Alcatel-Lucent, any one know this problem, the switch show nothing when I try to show tranceiver this time.

 

Highlighted
MVP Expert

Re: J9773A 2530 SWITCH Can't Allow third-party transceivers

Hi! Have you tried to write the command?

The allow-unsupported-transceiver is an undocumented feature that was included in releases numbered 16.02.0013 and later.

Since it is "Undocumented" it is not shown in the CLI with "?" as an option, nor is the command Tab completed.

More details here:

https://community.arubanetworks.com/aruba/attachments/aruba/CampusSwitching/3089/1/ARUBAOS-SWITCH%252520UNSUPPORTED%252520TRANSCEIVER%252520GUIDE%252520V2.pdf
New Contributor

Re: J9773A 2530 SWITCH Can't Allow third-party transceivers

Thank you so much !

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: