Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

Link aggregation for 2530-8G

Dear Community,

 

I have purchased a new 2530-8G PoE switch. I want to configure Link aggregation for port 1 and 2 for example.

 

However, in the GUI, I am not able to find the option to enable Link aggregation.

 

Is there any way I can configure link aggregation from the GUI?

 

Thank you in advance.

 

Rgds,

Johnson

MVP Expert

Re: Link aggregation for 2530-8G

Web Dashboard -> Interfaces -> Trunks (in HP ProVision/Aruba ArubaOS-Switch operating system jargon, links aggregation group - LAG - is ports trunking so...go to Trunks).

New Contributor

Re: Link aggregation for 2530-8G

Thanks for the reply.

Let me confirm my understanding based on your reply.

 

In the "Trunk Groups" there are many trunks.

"Trk1"

"Trk2"

...

...

 

I will need to add 2 ge ports to "Trk1" and then this trunk will have a speed of 2000Mbit/s without additional configuration. Is that correct?

MVP Expert

Re: Link aggregation for 2530-8G


@johnsonng wrote:

Thanks for the reply.

Let me confirm my understanding based on your reply.

 

In the "Trunk Groups" there are many trunks.

"Trk1"

"Trk2"

...

...

 

I will need to add 2 ge ports to "Trk1" and then this trunk will have a speed of 2000Mbit/s without additional configuration. Is that correct?


yes, it is the idea !




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
New Contributor

Re: Link aggregation for 2530-8G

Thank you very much for the confirmation!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: