Hello Parnassus, thanks for your interest.
Yes, the switch has the channel group with ID 2 defined:
!
interface Port-channel2
load-interval 30
!
And there are two interfaces in the EtherChannel:
!
interface GigabitEthernet0/24
description Enlace Resp 314903
load-interval 30
srr-queue bandwidth share 10 10 60 20
queue-set 2
priority-queue out
mls qos trust cos
channel-protocol lacp
channel-group 2 mode active
!
I know I can make LACP in Aruba, my problems right now are the QoS configurations, because it is a contactability provider.
Regards.