Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor II

Mirror Port 2930F Switch

Hi there,

 

Does the 2930F switch have the capability to mirror ports?

I am trying to monitor a port and cannot see any configuration command for it.

 

Quick response would be fantastic, much obliged.

 

 


Accepted Solutions
Highlighted

Re: Mirror Port 2930F Switch

You have local and remote mirrors in AOS-Switch. Since you're not specifically asking for remote mirrors I'll provide an example of a local mirror. A local mirror copies traffic to a certain destination port on the same switch. Hereby the steps:

 

  • mirror 1 - 4 port <PORT# EXIT the traffic>
  • Then you go to: 

    - interface <PORT/TRUNK>

    monitor all [in|out|both] mirror <SESSION> [no-tag-added]

     

    This is the most simple version of a mirror. You have more functions to select specific traffic, remote mirror etc. 

     

    Hope this helps you!

     

    Dobias

View solution in original post


All Replies
Highlighted

Re: Mirror Port 2930F Switch

Hi

 

You can find commands in this manual:

https://support.hpe.com/hpsc/doc/public/display?docId=a00055700en_us

page 391

 

Regards

 

PS: If this helps you, please give some kudos


PS: If you feel this information is useful and solved your question or problem, please do not forget to mark it as a solution and give me some kudos.
Highlighted

Re: Mirror Port 2930F Switch

You have local and remote mirrors in AOS-Switch. Since you're not specifically asking for remote mirrors I'll provide an example of a local mirror. A local mirror copies traffic to a certain destination port on the same switch. Hereby the steps:

 

  • mirror 1 - 4 port <PORT# EXIT the traffic>
  • Then you go to: 

    - interface <PORT/TRUNK>

    monitor all [in|out|both] mirror <SESSION> [no-tag-added]

     

    This is the most simple version of a mirror. You have more functions to select specific traffic, remote mirror etc. 

     

    Hope this helps you!

     

    Dobias

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: