I have a similar issue with a MAS 1500.
Each interface has the following error/code:
GE0/0/16
--------
GE0/0/16: Administratively Enable, Port status: Off
Maximum power: 30000 mW, Power consumption: 0 mW
Port voltage: 0 mV, Port current: 0 mA
PD class: Class-0, Priority: High, PSE port status: off, (code=37)
I have opened a cas with TAC but we have been unable to resolve it as of yet.
There are (5) AP 105's connected. The other (3) connections are to the firewall, controller, and the customers LAN (Which is an Allied Telesis switch).
The AP's do not power up. What does "code=37" mean?
Thanks!
-Herman