Wired Intelligent Edge (Campus Switching and Routing)

Reply
Contributor I

Re: Power-Over-Ethernet Redundancy 5400R ZL2

For anyone else with this issue, the fix in the end was updating to KB.16.09.0001

Highlighted
Contributor I

Re: Power-Over-Ethernet Redundancy 5400R ZL2

wright, can you clarify what exactly is fixed? Is it just that the show power-over-ethernet display shows the redundancy power available? And my 5412 vsf stack also does not have the (config)power-over-ethernet redundancy command available, does not mean redundancy is not available when power is lost to one supply?  Running KB 16.08.02.

Contributor I

Re: Power-Over-Ethernet Redundancy 5400R ZL2

Previously I wasn't able to enable PoE redundancy. You're correct that losing power to one supply would would of course still enable the switch to run, however now that redundancy is enabled (in my understanding) available PoE power is calculated to ensure all PoE devices can run on one power supply if necessary.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: