Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor II

S/N is differnet after stacking?

Hello all,

I have a strange behavior with the serial number of my switches.

At all documents or sticker with the serial number it is looking like:

SG7AK451xx after stacking and looking  with the cli  "show system information", the serial number looks like SG7AGYY1xx.

Is this a normal behavior?

best regards

Mic

Highlighted
MVP Expert

Re: S/N is differnet after stacking?

Greetings!

 

If you run the command 'show stacking detail', you should be able to view the serial number of each stack member — this should match the output of 'show system information'. If this is not the case (the two commands show different serial numbers), let us know and we'll investigate the issue.

 

If they do match as expected: are all of the displayed serial numbers different from what's on the switch labels, or are they being displayed in the CLI in a different order than expected based on how the switches are physically installed? 



Matt Fern
Senior Technical Marketing Engineer, Aruba Switching

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Highlighted
Occasional Contributor II

Re: S/N is differnet after stacking?

Hello Matthew,

sorry for the late reply!

If I run 'show stacking detail', it looks like:


Member ID : 1
Mac Address : ecebb8-1exxxx
Type : JL075A
Model : Aruba JL075A 3810M-16SFP+-2-slot Switch
Priority : 128
Status : Commander
ROM Version : KB.16.01.0008
Serial Number : SG7AGYY1xx
Uptime : 183d 15h 1m
CPU Utilization : 0%
Memory - Total : 692,453,376 bytes
Free : 500,513,896 bytes
Stack Ports -
#1 : Active, Peer member 2
#2 : Active, Peer member 2
#3 : Active, Peer member 2
#4 : Active, Peer member 2

 

Member ID : 2
Mac Address : ecebb8-1exxxx
Type : JL075A
Model : Aruba JL075A 3810M-16SFP+-2-slot Switch
Priority : 128
Status : Standby
ROM Version : KB.16.01.0008
Serial Number : SG7AGYY1xx
Uptime : 183d 15h 1m
CPU Utilization : 0%
Memory - Total : 692,453,376 bytes
Free : 518,096,672 bytes
Stack Ports -
#1 : Active, Peer member 1
#2 : Active, Peer member 1
#3 : Active, Peer member 1
#4 : Active, Peer member 1

 

if I run 'show system information' i get:

Software revision : KB.16.07.0002
Base MAC Addr : ecebb8-1exxxx

Member :1

ROM Version : KB.16.01.0008
Up Time : 183 days
CPU Util (%) : 5
MAC Addr : ecebb8-1exxxx
Serial Number : SG7AGYY1xx
Memory - Total : 692,453,376
Free : 500,523,656

 

Member :2

ROM Version : KB.16.01.0008
Up Time : 183 days
CPU Util (%) : 0
MAC Addr : ecebb8-1exxxx
Serial Number : SG7AGYY1xx
Memory - Total : 692,453,376
Free : 518,096,672

 

So you are right, I get the same wrong information....

It is really strange behavior.

Best regards,

Mic

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: