11-19-2012 01:57 PM
I need to setup dhcp relay on a S3500 switch running Version 22.214.171.124
I believe I have it set up right and that there is a problem in my dhcp server but just in case I got it wrong or I'm missing something I thought I better put up this post.
First set up the relay profile
(ArubaS3500-24-POE) (config) # interface-profile dhcp-relay-profile 1
(ArubaS3500-24-POE) (dhcp relay profile "1") #helper-address 172.16.1.254 <-- Your dhcp server ip address
Then apply the profile to the vlan interface
(ArubaS3500-24-POE) (config) #interface vlan 3
(ArubaS3500-24-POE) (vlan "3") #dhcp-relay-profile 1
(Aruba-24-POE_GREllington3) (vlan "3") #exit
Then of course do a wr mem.
Am I missing anything because it sure isn't working.....
Thanks guys !!!
Solved! Go to Solution.
Re: S3500 dhcp-relay
09-25-2014 09:29 AM - edited 09-25-2014 09:34 AM
This thread was very handy, however I am new to 3500 (Aruba) and need to change to a new DHCP server... can some one post how to remove the profile? I am unable, says, profile in use, but no vlan interface is assigned to it..
interface-profile dhcp-relay-profile DHCP-RELAY-Profile1 <-- Old Profile
helper-address 10.x.x.xx5 <-- Old dhcp server ip address
Created a new profile with new helper IP...
Removed the dhcp profile from vlan interface
assigned new profile to the VLAN interface...
Unable to remove old profile now?
Thanks for your help...
09-25-2014 09:32 AM