Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
MVP Guru Elite

Re: TACACS with Cisco ISE and ArubaOS-Switch

Do you have a priv-level ?

 

Like https://www.arubanetworks.com/techdocs/ClearPass/Aruba_DeployGd_HTML/Content/HP%20Switch%20Integration/Switch_mgmt_TACACS.htm



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Occasional Contributor II

Re: TACACS with Cisco ISE and ArubaOS-Switch

No I dont see it.

 

https://community.arubanetworks.com/t5/Security/ArubaOS-Admin-Authentication-with-Microsoft-NPS/td-p/433832

 

This article is similar and the person is using attribute 4 with string root.

 

I tried the same but it doesnt work.

 

Access Type = ACCESS_ACCEPT
Aruba-Admin-Role = root

Highlighted
MVP Guru Elite

Re: TACACS with Cisco ISE and ArubaOS-Switch

It is for RADIUS and Aruba(OS) Controller...



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Occasional Contributor II

Re: TACACS with Cisco ISE and ArubaOS-Switch

Ok thanks.

Any doc where I can find the exact value for Aruba switch shell?