Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor II

UK power for 5400 series switch

Hi all,

Probably a really obvious / simple question; but we have some 5406/5412 switch chassis. Some of the places I will be installing them only have 3 pin UK domestic grade power available. Can I plug 4 PSUs from the back of a big 5412 chassis straight into the 3 pin plug on the wall?

I ideally will have UPS etc but worst case might only have domestic style power available.

Will this be ok?
Highlighted
MVP Expert

Re: UK power for 5400 series switch

Greetings!

 

As long as you are using power cables with the proper connectors, and the circuit is properly rated for the switch in frequency (50 or 60 Hz), voltage (110-127 or 200-240 VAC), and current (will vary depending on switch power loading), this should work just fine. 



Matt Fern
Technical Marketing Engineer, Wired Intelligent Edge

Aruba, a Hewlett Packard Enterprise company

8000 FOOTHILLS BLVD  |  ROSEVILLE, CA 95747
T: 916.540.1759  |  E: mfern@hpe.com   |   Matt @ Twitter
Occasional Contributor II

Re: UK power for 5400 series switch

Thanks
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: