03-20-2019 12:17 PM
Probably a really obvious / simple question; but we have some 5406/5412 switch chassis. Some of the places I will be installing them only have 3 pin UK domestic grade power available. Can I plug 4 PSUs from the back of a big 5412 chassis straight into the 3 pin plug on the wall?
I ideally will have UPS etc but worst case might only have domestic style power available.
Will this be ok?
Solved! Go to Solution.
03-20-2019 04:59 PM
As long as you are using power cables with the proper connectors, and the circuit is properly rated for the switch in frequency (50 or 60 Hz), voltage (110-127 or 200-240 VAC), and current (will vary depending on switch power loading), this should work just fine.
Technical Marketing Engineer, Wired Intelligent Edge
Aruba, a Hewlett Packard Enterprise company
8000 FOOTHILLS BLVD | ROSEVILLE, CA 95747
T: 916.540.1759 | E: firstname.lastname@example.org | Matt @ Twitter