hi,
i have 2 x HP Core Switches (IRF Configured, Redundancy is workign fine)
and 2 x Aruba 7205 WLC connected to this HP Core with port-0 and port-1 connected to Core
below is the configuration at Core
----------------------------------------------------------------------------------------
interface Bridge-Aggregation60
description CONNECTED_TO_ARUBA_WLC-01
port link-type trunk
port trunk permit vlan 2 to 60
link-aggregation mode dynamic
#
interface GigabitEthernet1/1/0/23
port link-mode bridge
description CONNECT_TO_ARUBA_WLC-01
port link-type trunk
port trunk permit vlan 2 to 60
port link-aggregation group 60
#
interface GigabitEthernet1/1/0/24
port link-mode bridge
description CONNECT_TO_ARUBA_WLC-01
port link-type trunk
port trunk permit vlan 2 to 60
port link-aggregation group 60
#
-----------------------------------------------------------------------
#
interface Vlan-interface60
ip address 10.50.60.254 255.255.255.0
dhcp server apply ip-pool dhcp-vlan60
#
interface Vlan-interface24
ip address 10.50.27.254 255.255.255.0
dhcp server apply ip-pool dhcp-vlan24
#
-----------------------------------------------------
#
dhcp server ip-pool dhcp-vlan24 extended
network ip range 10.50.24.11 10.50.27.250
network mask 255.255.252.0
gateway-list 10.50.27.254
dns-list 10.1.1.250
domain-name abc.com
#
----------------------------------------------------------------------------------------
is this configuration will work fine ???
i can access the WLC now ..but clients can not get ip address
please help
regards,
Anvar