Wired Intelligent Edge (Campus Switching and Routing)

New Contributor

User-Roles Disabled on 2930M by Default



Does anyone know how to enable the user-role functionality on a 2930m? I can't seem to find any documentation on this, and from what i can find it appears that it is enabled by default. From the GUI there isn't much and from the CLI ive tried the obvious "?" and "tabs" to no avail. 


Aruba-2930M-48G-PoEP# show user-role

User Roles

Enabled : No
Initial Role : denyall

Type Name
---------- ------------------------------------------------------
predefined denyall




 Software revision  : WC.16.07.0002 



New Contributor

Re: User-Roles Disabled on 2930M by Default

For anyone who may need it, this was the command:


aaa authorization user-role enable 


This warning follows, FYI: Some legacy secure client access functionality is not supported when user roles are enabled.
Please refer to the end user documentation for details.

Guru Elite

Re: User-Roles Disabled on 2930M by Default

Take a look at the ClearPass Solution Guide for Wired Policy Enforcement.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
Showing results for 
Search instead for 
Did you mean: