Wired Intelligent Edge (Campus Switching and Routing)

Reply
New Contributor

VRRP with 4x 8320 ?

Hey all,

one short question..

 

The Datasheet from the Aruba 8320 says:

---

VRRP

Allows groups of two routers to dynamically back each other up to create highly available routed environments.

---

 

Normally i can create a VRRP with more than two routers. Is there really this limitation or can i create a VRRP with four 8320 Switches?

 

 

thank you!

Re: VRRP with 4x 8320 ?

2 or more. p255 of routing guide.

 

New Contributor

Re: VRRP with 4x 8320 ?

soo.. there is really an error in the datasheet?

 

thank you!

MVP Expert

Re: VRRP with 4x 8320 ?


@FrankB wrote:

soo.. there is really an error in the datasheet?

 


Yes, it is no often used with  more of 2 switchs.

 

You can use also Active-Gateway with 4x8320;;;




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5
MVP Expert

Re: VRRP with 4x 8320 ?

Not a real error IMHO...describing VRRP from a generic standpoint...writing it will use just two routers is an omission: instead of simply stating "two routers" that sentence should have been more properly "two or more routers".
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: