What is POE Bounce And The Behavior

MVP Expert
MVP Expert
Q:

What is POE bounce and it is behavior:



A:

POE bounce can be executed from Aruba Central for the switch to bounce the POE.

 

Navigation:

Login to the account -> Monitoring and reports -> Switches -> select the switch -> Tools -> Open Tools -> POE bounce

 

The above command will bounce the POE for the switch and below is the behavior,

 

I have connected the IAP-325 in the switch to port 6 of 2930F.

Logging into the switch, I executed the below command one by one immediately (which would have taken 3 seconds)

 

#Aruba-2930F-8G-PoEP-2SFPP(config)# interface  6

Aruba-2930F-8G-PoEP-2SFPP(eth-6)# no power-over-ethernet

Aruba-2930F-8G-PoEP-2SFPP(eth-6)# power-over-ethernet

 

The IAP immediately rebooted, and it was a complete boot, disconnecting all the clients connected and clearing the ARP AND DATATPATH BRIDGE.

 

I 01/01/90 00:42:50 00076 ports: port 6 is now on-line

I 01/01/90 00:42:47 05123 profile-manager: Device profile removed for Aruba AP

            a8bd27-cc9d28 on port 6.

I 01/01/90 00:42:47 00077 ports: port 6 is now off-line

If you look at the timer of the log in the switch, total time is about 3 seconds.

 

The POE bounce command will turn off, then turn on POE switch ports in 3 seconds

 

 

Version history
Revision #:
1 of 1
Last update:
‎08-23-2019 10:44 AM
Updated by: