Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
New Contributor

aruba activate-aruba CX 6400

Hi community.

I want to disable in an aruba cx switch this log:

 

Event|4646|LOG_ERR|AMM|-|Aruba Activate server https://devices-v2.arubanetworks.com is not reachable through any supported VRF.

 

What command can i use for disable this?

 

Thank you.


Accepted Solutions
Highlighted
MVP Guru

Re: aruba activate-aruba CX 6400

switch# show aruba-central
Central admin state : enabled
Central connection status : N/A
Central location : N/A

Activate connection status : connection_failure
Activate Server : devices-v2.arubanetworks.com

System time synchronized from Activate : N/A

VRF for connection : N/A

 

switch(config)# aruba-central

switch(config-aruba-central)# disable

View solution in original post


All Replies
Highlighted
MVP Guru Elite

Re: aruba activate-aruba CX 6400

Hi,

 

you need to add dns server on a VRF with internet access...



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
MVP Guru

Re: aruba activate-aruba CX 6400

switch# show aruba-central
Central admin state : enabled
Central connection status : N/A
Central location : N/A

Activate connection status : connection_failure
Activate Server : devices-v2.arubanetworks.com

System time synchronized from Activate : N/A

VRF for connection : N/A

 

switch(config)# aruba-central

switch(config-aruba-central)# disable

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: