Hello Collin
Thanks for the link
I already saw it before but still, this just attach the initial role which redirects you to the captive portal to a physical port
Ill give you an example of what i want to achive. I want to use MAS captive portal with aruba instant or any other random AP brand(which not necesary is connected to the mobility accesss switch)
Example:
Let say i got a small network in which i got 1 MAS and 1 Dlink swtich
I got VLAN 100 which is the corporate Wirelesss network
I got VLAN 50 which is the guest vlan, and the default gateway is on the mobility access switch
For example if i connect this instant AP to the port 0/0/1 and i would trunk this vlan 100 and vlan 50 to the instant AP i bealive i would get the captive portal even on my 802.1x ssid. because he will assign this captive portal role to anything that is connecting to that port and i dont want that, i jsut want to assign it to the vlan 50, and not to the vlan 100, not to anything that connect to that 0/0/1 port. Im connecting it to the same port but i just want the captive portal to one vlan not to both.
i dont know if you getting what im trying to do? maybe my english is not good enough and im confusing you in what im trying to achive.. :(
Cheers
Carlos