02-04-2019 04:06 PM
I think I initially assigned a VLAN as management vlan during the wizard setup and now, this particular VLAN isn't getting DHCP and passing other traffic. I've read that a VLAN that was assigned as 'management vlan' will not route or pass most traffic for security reasons. However, I cannot find the equivalent command of Aruba 2930f switch
no management-vlan xx
in Aruba S2500 switch.
BTW, all other VLAN works just fine except for this one.
Solved! Go to Solution.
02-04-2019 11:18 PM
Ok I figure this out.
It turns out that the native VLAN in a trunk shouldn't be included in the allowed VLAN. For some reason, doing this, all access ports won't communicate to the DHCP server.