Wireless Access

Reply
Occasional Contributor I

303h problem

I have a 303h that I am trying to setup for a personal network at my house. I see the SetMeUp SSID as long as the switch I have it connected to has no internet connection via a Ubiquity AirMax bridge. I am using PoE to power the 303h. Once, I connect the switch to the internet, the 303h stops broadcasting wifi and seems to go into a constant rebooting loop. Any idea on whats wrong? I have very little networking experience. Thank you

Guru Elite

Re: 303h problem

Is is possible that another party deployed this AP before you?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor I

Re: 303h problem

yes. I factory reset it though.

Occasional Contributor I

Re: 303h problem

I can connect to the switch directly with a LAN cable and my computer can connect to the internet without any problems.

MVP
MVP

Re: 303h problem

Most likely the AP is zerotouch provisioned (ZTP) through "aruba activate" or "cloud central", you should see the process when you have a serial cable connect to it. You can also follow the traffic through your firewall and looking for outgoing traffic to (i guess) *.arubanetworks.com

 

For detach from ZTP you have to contact TAC support.

 

Or simply block the outgoing connection on your firewall, lol ;)

Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP - Was this post usefull, Kudos are welcome.
MVP
MVP

Re: 303h problem

-

 

 

Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP - Was this post usefull, Kudos are welcome.
Occasional Contributor I

Re: 303h problem

 Thank you. Stupid question, how would I go about blocking the outgoing connection on my firewall? thank you

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: