Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

This thread has been viewed 0 times

  • 1.  5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    Posted May 10, 2019 02:49 PM

    I went to the Firmware upload tab and the 5400 and 5400R switches are not listed for a default firmware version.

    5400 series missing5400 series missing



  • 2.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    Posted May 10, 2019 03:18 PM

     

     



  • 3.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    Posted May 10, 2019 07:39 PM

    It does show up here at the link you gave me but the whole line is missing as configurable switches in Airwave.



  • 4.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    EMPLOYEE
    Posted May 11, 2019 06:15 AM

    The 5400R is known in Airwave as an ArubaOS switch. The list you show, I think it is from the group firmware page as it looks different than the generic firmware upgrade page, shows only HPE Comware switches.

     

    Do you have your 5400R switches in that group? And under the group Basic tab, have you enabled the Aruba OS Switches (Show device settings for...)?



  • 5.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    Posted May 13, 2019 01:08 PM

    I see the 5400R as a 3800/5400R switch but I am still missing the 5400 switch series.



  • 6.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    EMPLOYEE
    Posted May 14, 2019 03:20 AM

    I can't find the 5400 in the Supported Devices list for Airwave, so it might be unsupported. You can check with your local Aruba SE or Aruba TAC to have that validated.



  • 7.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    EMPLOYEE
    Posted May 14, 2019 07:18 AM

    Model W/o R is legacy device and it does not have support in Airwave



  • 8.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    Posted May 14, 2019 12:14 PM
    @Pavan Arshewar wrote:

    Model W/o R is legacy device and it does not have support in Airwave

    I have reached out to Aruba to find out their rationale if this is true. I may have to dump Airwave and move back to IMC.



  • 9.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    EMPLOYEE
    Posted May 14, 2019 12:50 PM

    correcting my statment, I mean not fully supported you can monitor the device with limited features. We can try add the non supported device as  universal device and can montior, if we are not able to add using vendor specific add option from Devices>Add page.



  • 10.  RE: 5400 and 5400R switches are not listed on Airwave Ver. 8.2.6.1

    MVP GURU
    Posted May 14, 2019 12:45 PM
    @Pavan Arshewar wrote: Model w/o R is legacy device and it does not have support in Airwave

    Technically speaking this statement is not correct (or, at least, not totally correct...in relation to the meaning one can give to the word "supported"): indeed HP ProCurve 5400zl Switch series is supported on Airwave but provided support includes only monitoring, it doesn't include neither Configuration push nor Firmware update push.