Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

650 Controller & AP 215's

This thread has been viewed 1 times

  • 1.  650 Controller & AP 215's

    Posted Aug 05, 2014 11:16 PM

    I would like to replace our old AP's with the midlevel 11ac 215 AP's which will require an upgrade to 6.4.  With that said will I lose any functionalitconnectivity with my home users running RAP2's and 3's?



  • 2.  RE: 650 Controller & AP 215's
    Best Answer

    EMPLOYEE
    Posted Aug 05, 2014 11:17 PM
    Yes. RAP-2s are no longer supported as of 6.4.x


  • 3.  RE: 650 Controller & AP 215's

    Posted Aug 05, 2014 11:19 PM

    What Tim said...... :smileymad:



  • 4.  RE: 650 Controller & AP 215's
    Best Answer

    Posted Aug 05, 2014 11:18 PM

    6.4.2 is required for the AP-215s.   6.4.x does not support the RAP-2s; but does support RAP-3s.



  • 5.  RE: 650 Controller & AP 215's

    EMPLOYEE
    Posted Aug 05, 2014 11:36 PM
    If budget allows, you may want to consider getting a 7000 series controller for your campus APs so that you can use all of the new DPI features and keep the 650 for your RAPs


  • 6.  RE: 650 Controller & AP 215's

    Posted Aug 05, 2014 11:44 PM

    I really wish I had that budget.  I currently just want to upgrade to 11ac and figured I would go with the mid-level 215 for a solution.