Wireless Access

I have a651-us 6.1.2.4 & cannot seem to access the wireless side. I search for AP's on that device, but it does not recognize it. Is there some configuration entry necessary to "expose" the wireless side?

Are you saying that you're not seeing the internal AP? Can you run 'show ap database long' from the CLI and let us know what you see?

 

-awl

(Aruba-wheelhouse) #show ap database long

AP Database ----------- Name               Group   AP Type  IP Address    Status          Flags  Switch IP    Wired MAC Address  Serial #   Slot/Port  FQLN  Outer IP    User ----               -----   -------  ----------    ------          -----  ---------    -----------------  --------   ---------  ----  --------    ---- 00:0b:86:67:df:d9  cp-srv  RAP-5WN  192.168.0.20  Up 18h:11m:37s  Rc2    10.1.10.151  00:0b:86:67:df:d9  AG0024580  1/0        N/A   10.9.44.10

Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed        I = Inactive; H = Using 802.11n license; D = Dirty or no config        X = Maintenance Mode; P = PPPoE AP; B = Built-in AP        R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP; c = CERT-based RAP; 2=Using IKE version 2        M = Mesh node; Y = Mesh Recovery

Total APs:1

Please send the output to "show log system all" to see if there is any issue initializing the internal AP.

 

Colin beat me to it. I was also going to ask if you'd seen anything on the console when the controller was booting up.

 

-awl

attached is not a PDF but a txt file

The log in inconclusive.  Please open a suport case so they can determine what is going on.

 

(Aruba650) #show ap database long AP Database ----------- Name Group AP Type IP Address Status Flags Switch IP Standby IP Wired MAC Address Serial # Port FQLN Outer IP User ---- ----- ------- ---------- ------ ----- --------- ---------- ----------------- -------- ---- ---- -------- ---- 00:0b:86:64:34:30 default 651 10.4.146.159 Down 10.4.146.159 0.0.0.0 00:0b:86:64:34:30 AF0001342 N/A N/A AP105 AP651 105 192.168.100.99 Up 18m:38s 2 192.168.100.22 0.0.0.0 24:de:c6:c3:c0:54 BT0522482 1/1 N/A N/A Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP; c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2 u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP i = Indoor; o = Outdoor M = Mesh node; Y = Mesh Recovery