Wireless Access

This community is currently in a read-only state due to a maintenance window. For more info click here
Reply
Highlighted
New Contributor

7210 Controller Aruba OS 8.4.0.0 persistent default admin password

Dear All;

 

After a fresh install of a 7210 wireless controller ( OS 8.4.0.0 ) , we changed the admin default password using command mgmt-user root admin.

but after reconnecting either password may be used ( both new and default passwords grant access).

What's missed to block access with the default password.

 

Thanks in advance for help.

 


Accepted Solutions
Highlighted
New Contributor

Re: 7210 Controller Aruba OS 8.4.0.0 persistent default admin password

Sorry for the false alert .. 

The controller is connected to a Cisco ACS and the issue was caused by an admin account on it.

 

Thanks again.

View solution in original post


All Replies
Highlighted
Guru Elite

Re: 7210 Controller Aruba OS 8.4.0.0 persistent default admin password

Is this a MM-MD setup or a standalone 7210?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
New Contributor

Re: 7210 Controller Aruba OS 8.4.0.0 persistent default admin password

This is a standalone config with a backup controller

Highlighted
New Contributor

Re: 7210 Controller Aruba OS 8.4.0.0 persistent default admin password

Sorry for the false alert .. 

The controller is connected to a Cisco ACS and the issue was caused by an admin account on it.

 

Thanks again.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: