Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

7210 SFP+ Issues

This thread has been viewed 3 times

  • 1.  7210 SFP+ Issues

    Posted Oct 19, 2015 12:03 PM

    Has anyone else run accros problems getting SFP+ modules working in Aruba 7210 controllers?

    No matter what I have tried so far, I am still only able to get the 10/100/1000 port to work.

     

    I have tried this on 6.4.2.6 and 6.4.2.12.

     

    I have tried Aruba (DAC-SFP-10GE-3M, DAC-SFP-10GE-1M) and Arista (CAB-SFP-SFP-1M).

    All of the cables I have tried have worked between S3500 switches and Arista DCS-7050SX-64-F.

     

    Here is what I am seeing:

    (Aruba-7200) (config) #show interface gigabitethernet 0/0/1

    GE 0/0/1 is up, line protocol is down
    Hardware is Gigabit Ethernet, address is 00:1A:1E:01:EC:32 (bia 00:1A:1E:01:EC:32)
    Description: GE0/0/1 (RJ45 Connector)
    Encapsulation ARPA, loopback not set
    Configured: Duplex ( AUTO ), speed ( AUTO )
    MTU 1500 bytes, BW is 1000 Mbit
    Last clearing of "show interface" counters 0 day 0 hr 5 min 1 sec
    link status last changed 0 day 0 hr 5 min 1 sec
    0 packets input, 0 bytes
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input error bytes, 0 CRC, 0 frame
    0 multicast, 0 unicast
    0 packets output, 0 bytes
    0 output errors bytes, 0 deferred
    0 collisions, 0 late collisions, 0 throttles
    This port is TRUSTED

    (Aruba-7200) (config) #show interface gigabitethernet 0/0/1 transceiver

    Module is SFP/SFP+
    Manufacturer : Molex Inc.
    Part Number : 74752-1301 , rev:
    S/N : 312330216
    Date Code : 130503 Lot:
    Optional Signals : N/A
    Supported Modes : 10GBASE-DAC-P, Copper Pigtail Connector
    Wavelength : N/A
    Cablelength : 3m

    (NM-HS-7200) (config) #show interface gigabitethernet 0/0/1 transceiver

    Module is SFP/SFP+
    Manufacturer : Molex Inc.
    Part Number : 74752-1051 , rev:
    S/N : 433032467
    Date Code : 141126 Lot:
    Optional Signals : N/A
    Supported Modes : 10GBASE-DAC-P, Copper Pigtail Connector
    Wavelength : N/A
    Cablelength : 1m


    (Aruba-7200) (config) #show interface gigabitethernet 0/0/1 transceiver

    Module is SFP/SFP+
    Manufacturer : Arista Networks
    Part Number : CAB-SFP-SFP-1M , rev: 0002
    S/N : XHC14481G1XJ
    Date Code : 141127 Lot: 00
    Optional Signals : N/A
    Supported Modes : 10GBASE-DAC-P, Copper Pigtail Connector
    Wavelength : N/A
    Cablelength : 1m

     

    Any help is greatly appreciated. I have little time for a TAC case and no cell reception or available hardwired phone onsite. :(



  • 2.  RE: 7210 SFP+ Issues
    Best Answer

    EMPLOYEE
    Posted Oct 19, 2015 12:05 PM

    You need to use ports 2-5 for 10G



  • 3.  RE: 7210 SFP+ Issues

    Posted Oct 19, 2015 12:08 PM

    Well, I do feel a bit foolish now. I for some reason had it in my head that the 7200 series had only 2 10G ports.



  • 4.  RE: 7210 SFP+ Issues

    Posted Sep 16, 2019 12:21 PM