Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

7220 Controller and OSPF%0D%0A

This thread has been viewed 2 times

  • 1.  7220 Controller and OSPF%0D%0A

    Posted Jun 06, 2014 04:39 PM

    We have a new 7220 Controller and we are generally a Cisco house for routers and switches. We recently discovered that something in our new controller is causing our routes to reconverge and don't know where to look. Any thoughts?


    #7220


  • 2.  RE: 7220 Controller and OSPF%0D%0A

    EMPLOYEE
    Posted Jun 06, 2014 04:56 PM

    Do you have OSPF enabled on your controller?  Disable it...


    #7220


  • 3.  RE: 7220 Controller and OSPF%0D%0A

    Posted Jun 06, 2014 05:20 PM

    All of our routers are setup to use OSPF and all of the 7220 controllers are as well. Can you tell me more about why I need to disable OSPF on the controllers?


    #7220


  • 4.  RE: 7220 Controller and OSPF%0D%0A
    Best Answer

    EMPLOYEE
    Posted Jun 06, 2014 05:22 PM

    Without knowing anything about your problem besides what you typed, If you have a problem with it, disable it.  Put in static routes and then put the OSPF configs interface by interface until you find out what the problem is.  There is nothing wrong in general with OSPF, but it has a very specific use case and in most situations not necessary.


    #7220