Wireless Access

New Contributor

7240 Aruba Controller 10gig SFP ports

Is there a command to enable the 10 gig port? When I log into the controller interface, all I see is:


interface gigabitethernet 0/0/2
description "GE0/0/2"
trusted vlan 1-4094


I plugged in an Aruba 10gig SFP and the description still didn't change. Is this supposed to be a plug and play or are there some extra configurations I have to work up in order to put the interface in 10gig capability mode?

Occasional Contributor II

Re: 7240 Aruba Controller 10gig SFP ports

The interface is still shown as a "gigabitethernet" even if you plug an SFP+ (i.e. 10gigE).


Do a "show interface gigabitethernet 0/0/2" and it should say something like "Hardware is 10 Gigabit Ethernet"


Search Airheads
Showing results for 
Search instead for 
Did you mean: