Wireless Access

Reply
Contributor II

80Mhz in HD area

HI guys,

 

            a simple question, why does Aruba recommends to use 20mhz or 40mhz but not 80Mhz in a HD areas, what is the reason behind that? doesn't 80 Mhz gives more throughput?

 

Thanks,

 

Farah

Guru Elite

Re: 80Mhz in HD area

You need more channel re-use in an HD design. 80 MHz does not allow for that.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.

Re: 80Mhz in HD area

Please read the 802.11ac VRD
http://community.arubanetworks.com/aruba/attachments/aruba/Aruba-VRDs/61/1/Aruba%20802.11ac%20Networks%20VRD.pdf
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA

Re: 80Mhz in HD area

hi,

here is a good video  about Very high density (VHD) 802.11ac wireless network design and deployment basics

 


Raouf CHAHBOUNE
ICT Network & Security Engineer
CCNP R/S | CCNA Security | ACMP|ACCP|ACDX



[If my post is helpful please give kudos, or mark as solved if it answers your post.]
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: