Wireless Access

Reply
Frequent Contributor I

ANT-2x2-5314/2314 connection to AP-374

Hello!

 

I've got equipment from our sales team for a POC.
They gave me AP-318, AP-374 ap's and ANT-2x2-5314/2314 antennas.

 

They should work together, if i connect the antennas to the connectors 0 and 1.
But I'm not shure if it is necessary to terminate the 5G2 and 5G3 connectors.

 

This thread says that the unused connectors should be terminated with 5 ohm terminators.
Do i have to expect a loss of performance if I dont terminate the unused connectors?

 

Thank you!

 

 

 

Best regards/Mit freundlichen Grüßen
Matthias

Re: ANT-2x2-5314/2314 connection to AP-374


@mom wrote:

Hello!

 

I've got equipment from our sales team for a POC.
They gave me AP-318, AP-374 ap's and ANT-2x2-5314/2314 antennas.

 

They should work together, if i connect the antennas to the connectors 0 and 1.
But I'm not shure if it is necessary to terminate the 5G2 and 5G3 connectors.

 

This thread says that the unused connectors should be terminated with 5 ohm terminators.
Do i have to expect a loss of performance if I dont terminate the unused connectors?

 


Since this is part of a POC, I suggest contacting the sales team that provided the configuration to ensure they did not miss an item or pick up an incorrect antenna. 


Charlie Clemmer
Aruba Customer Engineering
Frequent Contributor I

Re: ANT-2x2-5314/2314 connection to AP-374

Hello!
2x2 Antennas will work with AP-318/374, they are also listed in the ordering guide. My question was, if i have to expect performance losses if I dont terminate the unused connectors on the AP.

Thank you!

Best regards/Mit freundlichen Grüßen
Matthias
Frequent Contributor I

Re: ANT-2x2-5314/2314 connection to AP-374

Hello!
2x2 Antennas will work with AP-318/374, they are also listed in the ordering guide. My question was, if i have to expect performance losses if I dont terminate the unused connectors on the AP.

Thank you!

Best regards/Mit freundlichen Grüßen
Matthias

Re: ANT-2x2-5314/2314 connection to AP-374

The unused ports need to have terminators installed.


Charlie Clemmer
Aruba Customer Engineering
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: