I'm trying to upgrade an lc-cluster of mobiliy controllers to a newer version (from 8.3.0.7 to 8.3.0.11), after upgrading the Mobility Master and backup mobility master successfully to this version.
I've done this many times before, using the "Configuration->Tasks -> Upgrade Cluster" method on the MM dashboard and never had problems with it, but this time the upgrade procedure gets stuck. After the new AOS has been loaded into the alternate partion on both controllers, it starts with reloading one of the controllers in the cluster.
The controller rebooted fine, and runs the new firmware, but the MM still thinks the controller is not up again.
By issuing the command on the MM:
show lc-cluster <name> upgrade status verbose
the output still indicates status "Reboot In Progress" for the first controller even though the controller is already up and running for several hours. I manually rebooted this controller a second time, to no avail. The other controller in the cluster has status "Image Copy Success" and is still servicing all the APs.
The upgrade progress won't continue in this state where the first controller isn't recognised being up and running after the reboot...
So, How can I get this to finish ?
TIA Eddy