Wireless Access

Reply
Highlighted
New Contributor

AOS 8.5 - Show client 802.11 standard

Hi together,

 

I'm looking for a possibility to show what 802.11 standard (n, ac, ax, etc.) is used for each client when connected. I want to know where I can find this information via Web and which command is needed via CLI.

 

Thanks and best regards

Highlighted
Guru Elite

Re: AOS 8.5 - Show client 802.11 standard

show ap association client-mac <mac address of device>:

It will tell you under the phy column.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Highlighted
New Contributor

Re: AOS 8.5 - Show client 802.11 standard

Thanks for your reply. What I see with this command is the used band (g or a, including the channel width and the spatial stream information). It doesn't exactly show the used wireless standard. With AOS6 and IAPs, there is a column in the client view that tells which 802.11 standard is used (GN, AN, AC, AX.). This is really easy to read and shows me exactly what is used. Is there a similar view via Web?
Guru Elite

Re: AOS 8.5 - Show client 802.11 standard

On the overview page, you can customize the columns  to get the data you want..

Screenshot 2020-02-14 at 10.32.57.png


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: