Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AOS path from 6.4.3.11 to v8 on 7220

This thread has been viewed 0 times

  • 1.  AOS path from 6.4.3.11 to v8 on 7220

    Posted Jun 05, 2017 03:23 PM

    In order to accommodate our new 303H APs, I'm looking to upgrade our 7220 controllers to AOS8. Our two controllers (master/standby) are running 6.4.3.11. Is there a preferred path to v8? I have a few maintenance windows to work with so I can go to 6.4.4 and 6.5 first if it helps.



  • 2.  RE: AOS path from 6.4.3.11 to v8 on 7220

    Posted Jun 05, 2017 03:26 PM
    303H is only currently supported on 6.5.2.x


  • 3.  RE: AOS path from 6.4.3.11 to v8 on 7220

    Posted Jun 05, 2017 03:32 PM

    The spec sheet says ArubaOS™ 6.5.2.0/8.2.0.0.

    http://www.arubanetworks.com/products/networking/access-points/303h/

     



  • 4.  RE: AOS path from 6.4.3.11 to v8 on 7220

    Posted Jun 05, 2017 03:33 PM
    AOS 8.2.x is not out yet


  • 5.  RE: AOS path from 6.4.3.11 to v8 on 7220

    Posted Jun 05, 2017 03:36 PM

    On the path to 6.5.2 then, can I upgrade directly to that version or should I go through 6.4.4?



  • 6.  RE: AOS path from 6.4.3.11 to v8 on 7220

    Posted Jun 05, 2017 03:57 PM
    You can upgrade directly to AOS 6.5.2.x from ArubaOS 6.0.1.0 or later version of ArubaOS 6.x