07-19-2017 11:50 PM - edited 07-19-2017 11:55 PM
I am trying to create a wireless point-to-point connection.
I used the template on ASE for this. Now my point to point connection is up. I am also able to ping the POINT-AP. Behind this AP is a switch, but i am unable to ping this switch. I have added the VLAN on the controller where the IP of the switch belongs to.
I think i should be very basic, but i don't see it.
Does someone has an idea?
Solved! Go to Solution.
07-20-2017 12:37 AM
Problem solved. My though was from the controller (because with an accesspoint everything is tunneled). Forgot to allow the vlans on the switch where Portal AP was connected to.