Wireless Access

New Contributor

AP-105-sendbytes: error - bailout

I'm new to Aruba Wireless. As I connected the AP to the network I get the following message:

Domain Name: arubanetworks.com
No panic info available
Testing TPM... TPM driver running in 3204 mode
i2c_adapter i2c-1: sendbytes: error - bailout.
i2c_adapter i2c-1: sendbytes: error - bailout.
Failed -- Rebooting
killall: nanny: no process killed
killall: sapd: no process killed
SIOCSIFADDR: No such device
Sending SIGKILL to all processes.
Please stand by while rebooting the system.


I've done a purge & factory-reset with the same outcome. This mean it is a bad AP(s)? No other fixes?

Guru Elite

Re: AP-105-sendbytes: error - bailout

Please open a TAC case.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: AP-105-sendbytes: error - bailout


Output from the AP: error -bailout indicate a hardware failure moreover the AP  is not completing the boot process. We have process RMA for the APs.


Thanks for you assistance.

Search Airheads
Showing results for 
Search instead for 
Did you mean: