Wireless Access

Reply
New Contributor

AP-125 - How to access apboot> via hyperteminal

hey

 

i need to clear os on an ap-125

 

however need an idea on where to get started?

 

can i access the apboot prompt by booting the ap over the lan to give it power?

 

ive started a connection in hyperterminal and when i power up the ap using the lan i just get a whole heap of jiberish text and dont end up with any apboot> prompt.

 

can someone please help?

Occasional Contributor II

Re: AP-125 - How to access apboot> via hyperteminal

Plese try follows.

 

AP Reset Procedure

10. Connect Console Cable to AP

11. Pull out power cable of AP and insert again

12. When screen says "Hit Enter" - Hit Enter

13. Then, type: "purge" followed by Enter key

14. Type: "save" followed by Enter key

15. Type: "boot" followed by Enter key

 

 

Guru Elite

Re: AP-125 - How to access apboot> via hyperteminal


paradoxzero wrote:

hey

 

i need to clear os on an ap-125

 

however need an idea on where to get started?

 

can i access the apboot prompt by booting the ap over the lan to give it power?

 

ive started a connection in hyperterminal and when i power up the ap using the lan i just get a whole heap of jiberish text and dont end up with any apboot> prompt.

 

can someone please help?


Make sure you have "no Flow control" configured on your Terminal Configuration.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: