I have an AP-135 fresh out of the box that will not get an IP address, actually several that are all doing the same thing on startup. I have one in front of me consoled in to it watching the following occur. I have 77 other APs that are up and running without issue. Any ideas?
Hit <Enter> to stop autoboot: 0
Checking image @ 0xf6100000
Invalid image format version: 0xffffffff
Checking image @ 0xf6800000
Invalid image format version: 0xc
eth0: up, 1 Gb/s, full duplex
DHCP broadcast 1
DHCP broadcast 2
DHCP broadcast 3
DHCP broadcast 4
DHCP broadcast 5
Retry count exceeded; starting again
eth1: down
eth0: up, 1 Gb/s, full duplex
DHCP broadcast 1
DHCP broadcast 2
DHCP broadcast 3
DHCP broadcast 4
DHCP broadcast 5