Wireless Access

Reply
Occasional Contributor I

AP-203R

AP-203R is connected to aruba 7005 as remote AP. How can I enable eth 1 and 2 ports on AP?

Highlighted
MVP Guru

Re: AP-203R

Example:
!
ap wired-ap-profile "weebox-wiredap"
wired-ap-enable
trusted
switchport access vlan 10
!
ap wired-port-profile "weebox-wired"
wired-ap-profile "weebox-wiredap"
bridge-role "logon"
!
ap-group [AP GROUP]
enet1-port-profile "weebox-wired"
!

https://www.arubanetworks.com/techdocs/ArubaOS_801_Web_Help/Content/ArubaFrameStyles/1CommandList/ap_wired_port_profile.htm

 


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: AP-203R

Thank you Craig.

I must execute command on AP or controller? Please note that I use standalone controller

MVP Guru

Re: AP-203R

On the controller, you’ll same the same options in the GUI if you expand the AP Group configuration.

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Occasional Contributor I

Re: AP-203R

Thank you very much

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: